Opinion · · Peter Hogg
Finding certainty in uncertain times: How freight rail can manage costs and efficiency through data
Freight rail, by its very nature, is exposed to macroeconomic forces. But with trade tensions rising, tariffs being reintroduced, and geopolitical conditions shifting fast, operators are facing a new level of uncertainty – and need to adapt faster than ever.
North America’s deeply integrated cross-border rail networks are now caught in the middle of unprecedented trade disputes. At the same time, road freight continues to grow in flexibility and reach, putting more competitive pressure on rail. The industry is concurrently being asked to reduce costs, lift performance, and remain reliable, all while policy frameworks possibly continue to change around them.
Australia is facing similar pressures. Flooding and bushfires in recent years have caused significant disruptions to the east–west corridor, exposing the need for real-time infrastructure visibility and faster recovery capabilities [1]. Meanwhile, freight rail’s share of containerised transport to Port Botany remains low – the NSW Government planned to increase its share to 28% from a baseline of 17% [2] – as road transport dominates, increasing congestion and limiting productivity potential .
The problem is, traditional rail systems aren’t set up to adapt quickly. Long lead times, rigid maintenance cycles, and legacy infrastructure can slow down response times and decision-making.
That’s why we created Transend. Designed to give rail operators better visibility, it delivers constant, live diagnostic data that helps reduce costs, forecast maintenance needs more accurately, and, importantly, create a more efficient, safer operating environment for the entire industry.
Trade disruption and margin pressures
According to the Association of American Railroads, 38% of total US rail volume in 2023 was trade-related [3]. With the current global environment, trade volumes are under threat. And if volumes drop, the focus will turn to protecting margins.
In Australia, operators are already facing margin pressure from high maintenance costs on under-utilised branch lines. A report prepared for the NSW Government estimated routine maintenance costs of more than AU$6,000 per kilometre per year on regional grain lines [4].
It’s likely that rail operators globally will be tasked with solving the same equation: how to maintain performance while reducing overheads. The European Union’s EU Shift2Rail public-private partnership research initiative aims to help rail to achieve a 50% reduction in life-cycle costs, to double capacity, and improve reliability and punctuality by up to 50%.[5] This means greater reliance on existing assets and doing more with fewer resources.
While there’s much outside the industry’s control, operators still have influence over some of their biggest cost drivers.
[]A shift towards adaptabilityDelays, derailments, and unplanned outages cost the freight rail industry millions each year [6] both in direct expense and lost time.
The 2023 East Palestine derailment in the US is a recent example. Despite two of the three wayside detectors sounding alarms, the alert came too late to prevent a catastrophic bearing failure [7]. Testimony before the US House Transportation Committee confirmed that a real-time monitoring system would likely have prevented the incident [8].
Across the broader rail sector – not just operators, but also manufacturers, service providers, and suppliers – adaptability is becoming essential.
We’re seeing it in practice:
-
Wagon manufacturers are offering modular and leased options aligned to seasonal freight demand, helping operators flex without locking in capex.
-
Maintenance providers are deploying crews based on real-time diagnostics instead of fixed-cycle servicing.
-
Operators are shifting to condition-based maintenance, reducing unnecessary inspections and extending asset life.
Australia has one of the world’s most advanced examples in Rio Tinto’s AutoHaul system – a fully autonomous iron ore network in the Pilbara operating 2.4km-long trains across remote and rugged terrain. It’s helped improve reliability while driving down operational cost [9].
What the rail industry is increasingly learning – something well established in aviation, mining, shipping and road transportation – is that digital systems provide the flexibility needed to operate efficiently in unpredictable environments.
[]How Transend helps lower costsTransend is a real-time, cloud-based onboard monitoring system. It delivers diagnostic insights every 10 seconds across the train, covering:
-
Bearing and wheel temperature
-
Brake system performance
-
In-train force monitoring
-
Railcar handling and vibration data
-
Geolocation of every railcar and cargo
-
Below-rail infrastructure component performance
-
Integration with Internet of Things (IoT) technology and a cloud-based platform
These insights support:
-
Early fault detection, reducing the risk of derailments and costly failures
-
Lower Total Cost of Ownership, with savings across maintenance, infrastructure, track delays, and safety
-
Fewer service disruptions, through targeted interventions
-
Improved train handling and fuel efficiency, with crews receiving clearer operational data
-
Enhanced rail employee safety, by reducing the need for hazardous manual checks
-
Higher asset utilisation, with full network and asset visibility
-
Supply chain traceability, offering transparency at the cargo level
-
Greater overall network integrity, delivering connected oversight and contextualised awareness
Transend offers a greater than 100x performance improvement over legacy wayside detectors. In a scenario like East Palestine, it would have flagged the bearing issue well before failure, allowing for safe removal and preventing the costly consequences – an incident now expected to exceed US$1 billion in costs [10].
[]Productivity, capacity safety, recovery, and planning certaintyThe value of real-time data extends beyond daily operations. Transend helps shift maintenance and planning from reactive to predictive.
Operators can:
-
Increase safety for personnel and the public
-
Forecast maintenance and costs with precision
-
Improve productivity by avoiding unscheduled outages
-
Unlock the capacity of the existing operation and improve long-term capital planning
-
Recover faster from events such as floods or infrastructure damage
This is especially important in a country like Australia and North America, where remote networks experience climate events regularly and impact service continuity. One US Railroad stated climate change cost them US$100 million in a single year [11]. Transend supports rapid assessment and decision-making helping operators to prioritise and respond faster.
The system also integrates across infrastructure and rollingstock, right down to railcar-level and cargo monitoring. Transend is fully compatible with automation, including ATO integration, and supports more dynamic and responsive freight operations.
[]An immediate solution for the long termWhile the global outlook remains uncertain, rail operations don’t have to be.
By embracing modern monitoring systems, operators can take control of the costs, reduce risks, and make informed decisions that matter. A solution like Transend is just the start – the opportunities for further gains from the insights gleaned through data could provide ongoing benefits to business.
Industry commentators looked at what safety improvements could be made in response to derailments like East Palestine. Of the two ideas proposed, one would involve four years of design and testing, and the other would take the better part of one or two decades to complete [12].
Because Transend has already been developed over the last 10 years and has completed four years of trial, the implementation process becomes de-risked – bringing the freight rail industry into the 21st century by immediately investing in a tried and proven digital solution.
References
[1] Bureau of Infrastructure and Transport Research Economics – Road and Rail Supply Chain Resilience Review – Phase 1 [2] Transport for NSW – Use of Rail Freight at Port Botany [3} Association of American Railroads – Rail Traffic Data, 2023 [4] Maintenance costs for grain branch lines in NSW—FINAL report to IPART [5] International Rail Journal – Shift2Rail in full swing
[6] Train Delay and Economic Impact of In-Service Failures of Railroad Rolling Stock
[7] NTSB Mechanical Group Report DCA23HR001, Group B Exhibit 5, p.18 [8] House Transportation Committee Hearing – July 23, 2024
[9] Rio Tinto Media Release – AutoHaul Deployment, 2019
[10] Associated Press – Norfolk Southern’s fourth-quarter profit falls 33% as Ohio derailment costs continue to grow [11] Financial Times – Wildfires and ‘violent’ weather leave railroad giant facing $100m bill
[12] Road Track and Structures – Possible Paths to New-Tech Safety Improvements